Oils

TC-W3 2-cycle oil

TC-W3 meets the specified requirements of all foreign and domestic 2-cycle outboard manufacturers. Our ashless TC-W3 is formulated from ultra-clean base stock oil to provide superior protection against piston scuffing, bearing wear, spark plug fouling, pre-ignition and rust. This formulation has outstanding lubricity and miscibility for better mixing of fuel and oil. resulting in a cleaner running engine. Contains no phosphorus. Will not void manufactures' warranties!

Marine

11590
TC-W3 meets the specified requirements of all foreign and domestic 2-cycle outboard manufacturers. Our ashless TC-W3 is formulated from ultra-clean base stock oil to provide superior protection against piston scuffing, bearing wear, spark plug fouling, pre-ignition and rust. This formulation has outstanding lubricity and miscibility for better mixing of fuel and oil, resulting in a cleaner running engine. Contains no phosphorus. Will not void manufactures warranties!
11591
11592
Quart bottle. 10/master.
1 gallon container. 6/master.
SDS
11564
A synthetic blend gear lube that protects high performance lower units in extreme operating conditions. Highly recommended for all engines over 100 hp. Meets or exceeds API MT-1 and GL-5 ratings. Will not void manufactures warranties.
11565

5 gallon drum.

SDS
11540
Ideal for modern outboard and stern drive lower units. Meets or exceeds API MT-1 and GL-5 ratings. Will not void manufactures warranties.
11546
11552
5 gallon drum.
Quart bottle. 12/master.
SDS
11556
For mechanical shift outboards and stern drives. Meets U.S. Military Spec MIL-PRF-2105E and API MT-1 and GL-5 ratings. Will not void manufactures warranties.

SDS
11578
Formulated to provide viscosity and lubricity necessary to ensure proper pump performance and seal life. Combats high operating pressures and resists rust. Anti-foam and extreme pressure additives ensure excellent stability and shear resistance.

SDS

Marine lower

unit lube kit

Includes one quart of High Viscosity Lower Unit Gear Lube (11-552), and one Lower Unit Quart Pump (55-005), with 3/8"-16 Filler Fitting for Mercury, Mercruiser, OMC, Evinrude, Johnson, Volvo, Force, Gamefisher and Honda (70 hp and up) outboard engines.

11246 Clamshell. 6/master

SDS

Marine lower

unit fill kit

Kits includes two 10 oz. tubes of High Viscosity Lower Unit Gear Lube (11-540) and one filler tube for Mercruiser, OMC, Evinrude, Johnson, Volvo, Force and Gamefisher models.

11101 Clamshell. 6/master

SDS

SDS

Lawn & Garden

Power Lawn Mower 4-Cycle Oil

Perfect for any 4-cycle air cooled engine such as those in lawn mowers, tillers, garden tractors and snow throwers. SAE30.

11531 20 oz. bottle. 12/master

Chainsaw Bar and Chain Oil

Formulated to extend chain, bar and sprocket life. Protects against rust and corrosion with minimum "throw off" at high chain speeds. Resists thinning and freezing caused by temperate extremes.

11532 Quart bottle. 12/master

SDS

2-Cycle Oil

11462
Formulated for use in snowmobiles and other 2 cycle oil injection cold weather equipment requiring ashless TC-W3 oil. Excellent performance down to -40 degrees.
SDS
11524
No guessing with this handy oil. One bottle treats one gallon of gas, works in any ratio from 16:1 to 50:1.
SDS
11525
Formulated to improve performance, extend engine life and reduce plug fouling. Provides excellent wear protection and high temperature performance. Recommended for chain saws, trimmers, motorcycles, snow blowers, mowers and other air cooled 2-cycle engines.
SDS
11527
Formulated to improve performance, extend engine life and reduce plug fouling. Provides excellent wear protection and high temperature performance. Recommended for chain saws, trimmers, motorcycles, snow blowers, mowers and other air cooled 2-cycle engines.
SDS